ON OCTOBER 1,2008 THE BUILIDNGS CODE DIVISION OF OREGON REVISED THE OREGON SPECIALTY BUILIDNG CODE. SECTION R 109.1.4.1 IS HAS BEEN DELEATED.

• (a) Section R 109.1.4.1 is deleted and replaced

  with the following: The requirement in R318.2 that all

  moisture-sensitive wood framing members used in

  construction shall have a moisture content of not more

  than 19 percent of the weight of dry wood framing

  members is not subject to inspection by the authority

  having jurisdiction.

  (b) Section R318.2 is amended to read:

  Moisture content. Prior to issuance of the

  insulation/vapor barrier approval required by R109.1.5.2

  of this code:

  (A) All moisture-sensitive wood framing

  members used in construction shall have a moisture

  content of not more than 19 percent of the weight of dry

  wood framing members.

• WATER OUT OF OREGON WILL REDUCE MOISTURE CONTENT TO BELOW THE 19% AS REQUIRED BY CODE

• THE CUSTOMER HAS THE OPTION TO REDUCE THE LEVEL EVEN MORE BY REQUESTING SUCH

• Water Out will control the cost of water restoration and provide the service you expect.

  The costs associated with covered losses have spiraled out of control over the past decade. The emergence of mold as a covered loss can turn a simple water loss into a financial disaster. Another fact of which the insurers may not be aware, is that thousands of new water restoration contractors are turned out every year after only a two day certification course.

  Water Out and the growing number of expert contractors that use the patented equipment are providing insurance companies with the relief that they need. Lower restoration costs and satisfied customers. How can Water Out deliver what other contractors only promise? It is simple; we use the best equipment to dry a flooded building. The faster a building gets dry the lower the final cost.

  Water Out technology is patented and our trained and expert restoration contractors are licensed to use the name and equipment. Unlike desiccant and refrigerant dehumidifiers that were invented over fifty years ago. Water Out is designed to handle your problems TODAY! Faster, more complete drying at a lower cost.

  In a recent test done by an industry certified test facility the findings were: "Conclusion: The over all results show an outstanding method of drying achieving better results with regard to time, mould, and secondary damage prevention than any previously tested system using either conventional desiccants or refrigerant dehumidifiers." (National Flood School, Water Out Test, 4 June 2003).